Philips HTL3140B

Always there to help you Register your product and get support at www.philips.com/support

Question? Contact Philips

User manual

HTL3140B HTL3140S

English

Contents 1 Important

2 Help and support 2 Safety 2 Care for your product 3 Care of the environment 3 Compliance 3

2 Your SoundBar

4 Main unit 4 Remote control 4 Connectors 5 Wireless subwoofer 6

3 Connect and set up

6 Pair up with the subwoofer 6 Placement 7 Connect to TV 7 Connect audio from TV and other devices 7

4 Use your SoundBar

9 9 9 10 10 11 11 11 11 11

5 Update software

12 12 12

6 Wall mount

13

7 Product specifications

13

8 Troubleshooting

15

Adjust the volume Choose your sound Play audio through Bluetooth Connect Bluetooth via NFC MP3 player USB storage devices Auto standby Set display brightness Apply factory settings

Check software version Update software via USB

EN

1

1 Important Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply.

• •

• •

Help and support For extensive online support, visit www.philips.com/support to: • download the user manual and the quick start guide • watch video tutorials (available only for selected models) • find answers to frequently answered questions (FAQs) • email us a question • chat with our support representative. Follow the instructions on the website to select your language, and then enter your product model number. Alternatively, you can contact Consumer Care in your country. Before you contact, note down the model number and serial number of your product. You can find this information on the back or bottom of your product.

Safety Risk of electric shock or fire! • Never expose the product and accessories to rain or water. Never place liquid containers, such as vases, near the product. If liquids are spilt on or into the product, disconnect it from the power outlet immediately. Contact Consumer Care to have the product checked before use. • Never place the product and accessories near naked flames or other heat sources, including direct sunlight.

2

EN

Never insert objects into the ventilation slots or other openings on the product. Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. Disconnect the product from the power outlet before lightning storms. When you disconnect the power cord, always pull the plug, never the cable.

Risk of short circuit or fire! • Before you connect the product to the power outlet, ensure that the power voltage matches the value printed on the back or bottom of the product. Never connect the product to the power outlet if the voltage is different. Risk of injury or damage to this product! • Never place the product or any objects on power cords or on other electrical equipment. • If the product is transported in temperatures below 5°C, unpack the product and wait until its temperature matches room temperature before connecting it to the power outlet. • Parts of this product can be made of glass. Handle with care to avoid injury and damage. Risk of overheating! • Never install this product in a confined space. Always leave a space of at least four inches around the product for ventilation. Ensure curtains or other objects never cover the ventilation slots on the product. Risk of contamination! • Do not mix batteries (old and new or carbon and alkaine, etc.). • Danger of explosion if batteries are incorrectly replaced. Replace only with the same or equivalent type. • Remove batteries if they are exhausted or if the remote control is not to be used for a long time.

Batteries contain chemical substances, they should be disposed of properly.

Risk of swallowing batteries! • The product/remote control may contain a coin/button type battery, which can be swallowed. Keep the battery out of reach of children at all times! If swallowed, the battery can cause serious injury or death. Severe internal burns can occur within two hours of ingestion. • If you suspect that a battery has been swallowed or placed inside any part of the body, seek immediate medical attention. • When you change the batteries, always keep all new and used batteries out of reach of children. Ensure that the battery compartment is completely secure after you replace the battery. • If the battery compartment cannot be completely secured, discontinue use of the product. Keep out of reach of children and contact the manufacturer.

This is CLASS II apparatus with double insulation, and no protective earth provided.

Care for your product Use only microfiber cloth to clean the product.

Care of the environment Disposal of your old product and battery

English

•

This symbol on a product means that the product is covered by European Directive 2012/19/EU.

This symbol means that the product contains batteries covered by European Directive 2013/56/EU which cannot be disposed of with normal household waste. Inform yourself about the local separate collection system for electrical and electronic products and batteries. Follow local rules and never dispose of the product and batteries with normal household waste. Correct disposal of old products and batteries helps prevent negative consequences for the environment and human health. Removing the disposable batteries To remove the disposable batteries, see battery installation section.

Compliance This product complies with the radio interference requirements of the European Community. Hereby, Gibson Innovations declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. You can find the Declaration of Conformity on www.p4c.philips.com.

Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. EN

3

2 Your SoundBar Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your SoundBar at www.philips.com/support.

Main unit

Remote control This section includes an overview of the remote control.

a

b

This section includes an overview of the main unit.

c d e

a b

a

c

d

e

(Standby-On/Standby indicator) • Switch the SoundBar on or to standby. • When the SoundBar is in standby, the standby indicator turns red.

l

f g h i k

j

b SOURCE Select an input source for the SoundBar. c Display panel (Standby-On) Switch the SoundBar on or to standby.

d +/- (Volume) Increase or decrease volume.

a

e NFC tag Tap the NFC-enabled device on the tag for Bluetooth connection.

b Source buttons HDMI ARC: Switch your source to HDMI ARC connection. : Switch to Bluetooth mode. USB: Switch to USB mode. OPTICAL: Switch your audio source to the optical connection. COAX: Switch your audio source to the coaxial connection. AUDIO IN: Switch your audio source to the MP3 connection (3.5mm jack). AUX: Switch your audio source to the AUX connection.

4

EN

/ (Previous/Next) Skip to the previous or next track in USB mode.

d

(Play/Pause) • Start, pause or resume play in USB mode.

Connectors

English

c

This section includes an overview of the connectors available on your SoundBar. g f

e BASS +/Increase or decrease bass. f Volume control • +/-: Increase or decrease volume. • : Mute or restore volume. g SOUND Select a sound mode. h SURROUND ON/OFF Select surround or stereo sound. i AUDIO SYNC +/Increase or decrease audio delay. j DIM Set the brightness of SoundBar display panel. k NIGHT Turn night mode on or off. l TREBLE +/Increase or decrease treble.

a b c

d e

a DIGITAL IN-COAXIAL Connect to a coaxial audio output on the TV or a digital device. b AUX IN (L/R) Connect to an analog audio output on the TV or an analog device. c DIGITAL IN-OPTICAL Connect to an optical audio output on the TV or a digital device. d DC IN Connect to the power supply. e HDMI OUT (ARC) - TO TV Connect to the HDMI input on the TV. f

• Audio input from a USB storage device. • Upgrade software of this product. • Charge a USB device.

g AUDIO IN Audio input from, for example, an MP3 player (3.5mm jack).

EN

5

Wireless subwoofer The SoundBar comes with a wireless subwoofer.

3 Connect and set up This section helps you connect your SoundBar to a TV and other devices, and then set it up. For information about the basic connections of your SoundBar and accessories, see the quick start guide. Note •• For identification and supply ratings, see the type plate at the back or bottom of the product.

•• Before you make or change any connections, make sure

that all devices are disconnected from the power outlet.

a CONNECT (connect) Press to to enter the pairing mode for the subwoofer. b Subwoofer indicator • When the power is turned on, the indicator lights up. • During wireless pairing between the subwoofer and the main unit, the indicator blinks white quickly. • When the pairing succeeds, the indicator lights up white. • When the pairing fails, the indicator blinks white slowly.

Pair up with the subwoofer The wireless subwoofer automatically pairs up with the SoundBar for wireless connection when you turn on the SoundBar and the subwoofer. If no audio from the wireless subwoofer can be heard, manually pair up the subwoofer.

1

c AC MAINS~ Connect to the power supply.

2 3

4 6

EN

Turn on the SoundBar and the subwoofer. »» If the connection to the SoundBar is lost, the indicator on the subwoofer blinks white slowly. Press the CONNECT (connect) button on the subwoofer to enter the pairing mode. »» The indicator on the subwoofer blinks white quickly. On the remote control, within six seconds press twice then BASS + once, and then hold down SURROUND ON. »» If the pairing succeeds, the indicator on the subwoofer lights up white. »» If the pairing fails, the indicator on the subwoofer blinks white slowly. If the pairing fails, repeat the steps above.

English

Placement TV

Place the subwoofer at least 1 meter (3 feet) away from your SoundBar, and ten centimeters away from the wall. For best results, place your subwoofer as shown below.

1

2

Using a High Speed HDMI cable, connect the HDMI OUT (ARC)-TO TV connector on your SoundBar to the HDMI ARC connector on the TV. • The HDMI ARC connector on the TV might be labeled differently. For details, see the TV user manual. On your TV, turn on HDMI-CEC operations. For details, see the TV user manual. Note

•• If your TV is not HDMI ARC compliant, connect

an audio cable to hear the TV audio through your SoundBar (see 'Connect audio from TV and other devices' on page 7). •• If your TV has a DVI connector, you can use an HDMI/ DVI adapter to connect to TV. However, some of the features may not be available.

Connect to TV Connect your SoundBar to a TV. You can listen to audio from TV programs through your SoundBar. Use the best quality connection available on your SoundBar and TV.

Connect to TV through HDMI (ARC) Your SoundBar supports HDMI with Audio Return Channel (ARC). If your TV is HDMI ARC compliant, you can hear the TV audio through your SoundBar by using a single HDMI cable.

Connect audio from TV and other devices Play audio from TV or other devices through your Soundbar speakers. Use the best quality connection available on your TV, Soundbar, and other devices. Note •• When your Soundbar and TV are connected through

HDMI ARC, an audio connection is not required. (see 'Connect to TV through HDMI (ARC)' on page 7)

EN

7

Option 1: Connect audio through a digital optical cable

Option 3: Connect audio through analog audio cables

Best quality audio

Basic quality audio

1 TV

Using an analog cable, connect the AUX connectors on your SoundBar to the AUDIO OUT connectors on the TV or other device. DVD

1

Using an optical cable, connect the OPTICAL connector on your SoundBar to the OPTICAL OUT connector on the TV or other device. • The digital optical connector might be labeled SPDIF or SPDIF OUT.

Option 2: Connect audio through a digital coaxial cable Good quality audio

1

8

Using a coaxial cable, connect the COAXIAL connector on your SoundBar to the COAXIAL/DIGITAL OUT connector on the TV or other device. • The digital coaxial connector might be labeled DIGITAL AUDIO OUT.

EN

• BRIGHT: Spice up your dull movies and music with added sound effects. • CLEAR: Hear every detail in your music and clear voices in your movies. • WARM: Experience spoken words and music vocals in comfort. • PERSONAL: Personalize the sound based on your preferences.

This section helps you use the SoundBar to play audio from connected devices. Before you start • Make the necessary connections described in the quick start guide and the user manual. • Switch the SoundBar to the correct source for other devices.

Surround sound mode Experience an immersive audio experience with surround sound modes.

1

Adjust the volume 1

Press +/- (Volume) to increase or decrease a volume level. • To mute sound, press (Mute). • To restore the sound, press (Mute) again or press +/- (Volume).

Equalizer Change the high frequency (treble) and low frequency (bass) settings of the SoundBar.

1

Choose your sound This section helps you choose the ideal sound for your video or music.

Sound mode Select predefined sound modes to suit your video or music.

1

Press SOUND to select a sound option from the display panel. • AUTO: Automatically select a sound setting based on the sound stream. • POWERFUL: Enjoy thrilling arcade sounds, ideal for action-packed videos and loud parties. • BALANCED: Experience the original sound of your movies and music, without added sound effects.

Press SURROUND ON/OFF to turn surround mode on or off. • On: Create a surround listening experience. • Off: Two-channel stereo sound. Ideal for listening to music.

Press TREBLE +/- or BASS +/- to change the frequency.

Synchronize video and sound If the audio and video are not synchronized, delay the audio to match the video.

1

Press AUDIO SYNC +/- to synchronize the audio with the video.

Night mode For quiet listening, night mode decreases the volume of loud sounds when audio is played. Night mode is only available for Dolby Digital soundtracks.

1

Press NIGHT to turn night mode on or off.

EN

9

English

4 Use your SoundBar

Play audio through Bluetooth Through Bluetooth, connect the SoundBar with your Bluetooth device (such as an iPad, iPhone, iPod touch, Android phone, or laptop), and then you can listen to the audio files stored on the device through your SoundBar speakers. What you need • A Bluetooth device which supports Bluetooth profile A2DP, AVRCP and with Bluetooth version as 3.0 + EDR. • The maximum operational range between the SoundBar and a Bluetooth device is approximately 10 meters (30 feet).

1 2

3

4

10

Press on the remote control to switch the SoundBar to Bluetooth mode. »» BT is displayed on the display panel, blinking. On the Bluetooth device, switch on Bluetooth, search for and select PHILIPS HTL3140 to start connection (see the user manual of the Bluetooth device on how to enable Bluetooth). »» During connection, BT on the display panel blinks. Wait until you hear a beep sound from the SoundBar. »» When the Bluetooth connection succeeds, BT is displayed on the display panel.

5

Note •• The music streaming may be interrupted by obstacles

between the device and SoundBar, such as wall, metallic casing that covers the device, or other devices nearby that operate in the same frequency. •• If you want to connect your SoundBar with another Bluetooth device, press and hold on the remote control to disconnect the currently connected Bluetooth device.

Connect Bluetooth via NFC NFC (Near Field Communication) is a technology that enables short-range wireless communication between NFC-enabled devices, such as mobile phones. What you need • A Bluetooth device with NFC function. • For pairing, tap the NFC device on the NFC tag of the SoundBar.

1 2

»» If the connection fails, BT on the display panel blinks continuously. Select and play audio files or music on your Bluetooth device. • During play, if a call is coming, music play is paused. Play resumes when the call ends. • If your Bluetooth device supports AVRCP profile, on the remote control you can press / to skip to a track, or press to pause/resume play.

EN

To exit Bluetooth, select other source. • When your switch back to Bluetooth mode, Bluetooth connection remains active.

3

Enable NFC on the Bluetooth device (see the device' s user manual for details). Tap the NFC device on the NFC tag of the SoundBar until you hear a beep sound from the SoundBar. »» When the Bluetooth connection succeeds, BT is displayed on the display panel. »» If the connection fails, BT on the display panel blinks continuously. Select and play audio files or music on your NFC device. • To break the connection, tap again the NFC device with the NFC tag on the SoundBar.

Connect your MP3 player to play your audio files or music. What you need • An MP3 player. • A 3.5mm stereo audio cable.

1 2 3

Using the 3.5mm stereo audio cable, connect the MP3 player to the AUDIO IN connector on your SoundBar. Press AUDIO IN on the remote control. Press the buttons on the MP3 player to select and play audio files or music.

Note •• This product supports WMA files which are converted

via Windows Media Player (WMA files converted via other file format converters may not work). •• This product may not be compatible with certain types of USB storage device. •• If you use a USB extension cable, USB HUB, or USB multi-reader, the USB storage device may not be recognized. •• Digital camera PTP and MTP protocols are not supported. •• Do not remove the USB storage device while it is being read. •• DRM-protected music files (MP3, WMA) are not supported. •• Support a USB port: 5V , 1A.

USB storage devices

Auto standby

Enjoy audio on a USB storage device, such as an MP3 player and USB flash memory, etc.

When playing media from a connected device, the SoundBar automatically switches to standby after 15 minutes of button inactivity and no audio/video play from a connected device.

What you need • A USB storage device that is formatted for FAT or NTFS file systems, and complies with the Mass Storage Class. • An MP3 or WMA file on a USB storage device

1 2 3

Connect a USB storage device to this product. Press USB on the remote control. Use the remote control to control play.

Button

/ USB

Action

Start, pause or resume play. Skip to the previous or next track. During USB play, press repeatedly to select a repeat or shuffle mode, or turn off a play mode.

Set display brightness You can press DIM repeatedly to select a different brightness level of the display panel on this product.

Apply factory settings You can reset this product to the default settings programmed at the factory.

1

In any source mode, on the remote control press Volume -, BASS -, and TREBLE - in sequence within three seconds. »» When the factory settings restore is complete, the product automatically switches off and restarts.

EN

11

English

MP3 player

5 Update software To get the best features and support, update your product with the latest software. What you need • Connect this product to your TV through HDMI.

Check software version In HDMI ARC source, on the remote control press TREBLE -, BASS -, and Volume - in sequence.

Update software via USB 1 2

Check the latest software version on www.philips.com/support. • Search for your model and click on "Software and drivers". Download the software into a USB storage device. a Unzip the download if zipped, and make sure that the unzipped file is named "HTL3140.BIN". b Put the "HTL3140.BIN" file in the root directory.

3 4 5

12

Connect the USB storage device to the (USB) connector on this product. Switch this product to the HDMI ARC source, and switch your TV to the HDMI source. On the remote control, within six seconds press twice then Volume + once, and then hold down SURROUND ON. »» If an upgrade media is detected, on the TV screen you are prompted to start the update.

EN

6 7

»» If an upgrade media is not detected, an error message is displayed on the TV screen. Make sure that the latest software of this product is put in the USB storage device. Press

to start the update.

Wait until the update is completed. »» If the update is complete, this product automatically turns off and on again. Caution

•• Do not turn off the power or remove the USB storage

device when the software update is in progress because you might damage this player.

Note

7 Product specifications

•• Improper wall mounting may result in accident, injury or

damage. If you have any query, contact Consumer Care in your country. •• Before wall mounting, make sure the wall can support the weight of your SoundBar. •• Before wall mount, you need not remove the four rubber feet at the bottom of the SoundBar, otherwise the rubber feet cannot be fixed back.

Screw length/diameter Depending on the type of wall mounting your SoundBar, make sure that you use screws of a suitable length and diameter. 3.5-4mm

English

6 Wall mount

Note •• Specifications and design are subject to change without notice.

Amplifier • • • •

4mm

Total output power: 200W RMS (+/- 0.5 dB, 10% THD) Frequency response: 20 Hz-20 kHz / ±3 dB Signal-to-noise ratio: > 65 dB (CCIR) / (A-weighted) Input sensitivity: • AUX: 900 mV • AUDIO IN: 500 mV

Audio > 25mm

See the illustration in the quick start guide on how to wall mount the SoundBar. 1) Drill two holes on the wall. 2) Secure the dowels and screws in the holes. 3) Hang the SoundBar on the fastening screws.

•

S/PDIF Digital audio input: • Coaxial: IEC 60958-3 • Optical: TOSLINK

USB • • • • •

• •

Compatibility: Hi-Speed USB (2.0) Class support: USB Mass Storage Class (MSC) File system: FAT16, FAT32, NTFS Supports MP3 and WMA file formats Sampling frequency: • MP3: 8 kHz, 11 kHz, 12 kHz, 16 kHz, 22 kHz, 24 kHz, 32 kHz, 44.1 kHz, 48 kHz • WMA: 44.1 kHz, 48 kHz Constant bit rate: • MP3: 8 kbps-320 kbps • WMA: 32 kbps-192 kbps Version: • WMA: V7, V8, V9

EN

13

Note •• This product supports WMA files which are converted via Windows Media Player (WMA files converted via other file format converters may not work).

• •

Remote control batteries •

Bluetooth •• •• •• ••

Bluetooth profiles: A2DP, AVRCP Bluetooth version: 3.0 + EDR Frequency band/Output power: 2400 - 2483.5 MHz / ≤ 20 dBm NFC frequency: 13.56 MHz

• • •

•• ••

•

Main unit ••

•• • • •• ••

Power supply: • Model (Philips branded AC power adapter): DYS602-210309W; AS650210-AA309 • Input: 100-240 V~, 50/60 Hz 1.5 A • Output: 21V , 3.09A Standby power consumption: ≤ 0.5 W Speaker impedance • Woofer: 8 ohm • tweeter: 16 ohm Speaker drivers: 2 x (90mm/3.5" x 34mm/1.3") woofer + 2 x 31mm/1.2" tweeter Dimensions (WxHxD): 843 x 52 x 60 mm Weight: 1.4 kg

Subwoofer • • • • •

Power supply: 220-240 V~, 50-60 Hz Power consumption: 35 W Standby power consumption: ≤ 0.5 W Impedance: 3 ohm Speaker drivers: 1 x 134 mm (5.25") woofer

14

EN

1 x AAA-R03-1.5 V

Standby information

Wireless speaker link Frequency band: 2400 - 2483.5 MHz Output power: ≤ 20 dBm

Dimensions (WxHxD): 226 x 251 x 306 mm Weight: 4.14 kg

When the product remains inactive for 15 minutes, it automatically switches to standby or networked standby. The power consumption in standby or networked standby is less than 0.5W. To deactivate Bluetooth connection, press and hold the Bluetooth button on the remote control. To activate Bluetooth connection, enable Bluetooth connection on your Bluetooth device, or enable Bluetooth connection via the NFC tag (if available).

Warning •• Risk of electric shock. Never remove the casing of the product.

To keep the warranty valid, never try to repair the product yourself. If you have problems using this product, check the following points before you request service. If you still have a problem, get support at www.philips.com/support.

Main unit The buttons on the SoundBar do not work. • Disconnect the SoundBar from the power supply for a few minutes, then reconnect.

Sound No sound from SoundBar speakers. • Connect the audio cable from your SoundBar to your TV or other devices. However, you do not need a separate audio connection when the SoundBar and TV are connected through HDMI ARC connection. • Reset your SoundBar to its factory settings. • On the remote control, select the correct audio input. • Make sure that the SoundBar is not muted. No sound from the wireless subwoofer. • Wirelessly connect the subwoofer to the SoundBar (see 'Pair up with the subwoofer' on page 6). Distorted sound or echo. • If you play audio from the TV through the SoundBar, make sure that the TV is muted. Audio and video are not synchronized. • Press AUDIO SYNC +/- to synchronize the audio with the video.

Error message is displayed on the display panel. • When "ERROR" is displayed, it indicates that an input audio format is not supported. • When "USB ERROR" is displayed, it indicates that the connected USB device is not supported. • When "HDMI ARC" blinks, it indicates that the connected TV is not HDMI ARC compliant or an unsupported audio format is detected.

Bluetooth A device cannot connect with the SoundBar. • The device does not support the compatible profiles required for the SoundBar. • You have not enabled the Bluetooth function of the device. See the user manual of the device on how to enable the function. • The device is not correctly connected. Connect the device correctly. • The SoundBar is already connected with another Bluetooth device. Disconnect the connected device, then try again. Quality of audio play from a connected Bluetooth device is poor. • The Bluetooth reception is poor. Move the device closer to the SoundBar, or remove any obstacle between the device and the SoundBar. The connected Bluetooth device connects and disconnects constantly. • The Bluetooth reception is poor. Move the device closer to the SoundBar, or remove any obstacle between the device and the SoundBar. • Turn off Wi-Fi function on the Bluetooth device to avoid interference. • For some Bluetooth, the Bluetooth connection can be deactivated automatically to save power. This does not indicate any malfunction of the SoundBar. EN

15

English

8 Troubleshooting

NFC A device cannot connect with the SoundBar via NFC. • Make sure that the device is supported by NFC. • Make sure that NFC is enabled on the device (see the device' s user manual for details). • For pairing, tap the NFC device on the NFC tag of the SoundBar.

16

EN

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Gibson Innovations Limited is under license. Other trademarks and trade names are those of their respective owners.

The N Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries.

HTL3140B 3140S_12_UM_AR.indd 14

20-6-2017 14:52:57

Specifications are subject to change without notice Copyright © 2014 Gibson Innovations Limited. Revised Edition © 2017 This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under. HTL3140B/3140S_12_UM_V7.0

HTL3140B 3140S_12_UM_AR.indd 16

20-6-2017 14:52:58