D-Link DAP-1610

Version 1.01 | 2019/12/19

User Manual

AC1200 Wi-Fi Range Extender DAP-1610

Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes.

Manual Revisions Revision

Date

Description

1.00

September 22, 2017

• Initial release

1.01

December 19, 2019

• Minor changes

Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies. Apple®, Apple logo®, Safari®, iPhone®, iPad®, iPod touch® and Macintosh® are trademarks of Apple Inc., registered in the U.S. and other countries. App StoreSM is a service mark of Apple Inc. Chrome™ browser, Google Play™ and Android™ are trademarks of Google Inc. Internet Explorer®, Windows® and the Windows logo are trademarks of the Microsoft group of companies. Copyright © 2019 by D-Link Corporation. All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Corporation.

Power Usage This device is an Energy Related Product (ErP) with High Network Availability (HiNA), and automatically switches to a power-saving Network Standby mode within 1 minute of no packets being transmitted. If it is not needed during certain periods of time, it can be unplugged to save energy. Network Standby: 3.54 watts D-Link DAP-1610 User Manual

i

Table of Contents

Table of Contents Preface.................................................................................. i Product Overview............................................................... 1 Package Contents.......................................................................... 1 System Requirements.................................................................. 2 Introduction.................................................................................... 3 Features..................................................................................... 3 What is a Wireless Extender?............................................. 4 Hardware Overview...................................................................... 5 Top.............................................................................................. 5 Bottom....................................................................................... 6 Back............................................................................................ 8 Installation.......................................................................... 9 Wireless Installation Considerations....................................... 9 Antenna Setup..............................................................................10 Hardware Setup...........................................................................11 Getting Started.................................................................12 WPS-PBC Configuration............................................................13 Optimize Extender Location....................................................14 QRS Mobile App Setup..............................................................15 Web-based Setup........................................................................20 Setup Wizard.................................................................................21 Connecting Your Device via WPS...................................22 WPS Successful................................................................23 WPS Unsuccessful...........................................................23 Extend an Existing Network.............................................24 D-Link DAP-1610 User Manual

Add Wireless to Your Wired Network............................27 Configure Administrator Password...............................29 Save Your Configuration....................................................30 Configuration....................................................................31 Home...............................................................................................31 Settings...........................................................................................33 Extender Settings................................................................33 Network Settings.................................................................35 Autoconfiguration (SLAAC/DHCPv6).......................36 Static IPv6..........................................................................37 Link-local Only.................................................................38 Management.................................................................................39 Admin......................................................................................39 System.....................................................................................40 Upgrade..................................................................................41 Statistics..................................................................................42 Connecting Wireless Clients to the Extended Network.43 WPS Button....................................................................................43 Windows® 8....................................................................................44 WPA/WPA2.............................................................................44 Windows® 7....................................................................................46 WPA/WPA2.............................................................................46 Windows Vista®.............................................................................49 WPA/WPA2.............................................................................50 Troubleshooting...............................................................52 ii

Table of Contents

Wireless Basics..................................................................54 Tips....................................................................................................55 Technical Specifications...................................................56 GPL Code Statement........................................................57 Safety Statements............................................................58

D-Link DAP-1610 User Manual

iii

Section 1 - Product Overview

Package Contents DAP-1610 AC1200 Wi-Fi Range Extender

Wi-Fi Configuration Note

Wi-Fi Configuration Card

Quick Installation Guide

If any of the above items are missing, please contact your reseller.

D-Link DAP-1610 User Manual

1

Section 1 - Product Overview

System Requirements Network Requirements

Web-based Configuration Utility Requirements

D-Link DAP-1610 User Manual

• A wireless router with an active Internet connection. • IEEE 802.11ac, 802.11n, 802.11g, 802.11b, or 802.11a wireless clients/devices A Computer or Mobile Device with the following: • Windows®, Apple® Mac OS®, or Linux-based operating system • Wireless adapter or Wi-Fi functionality • An Apple® iPhone®, iPod touch®, iPad®, or Android™ mobile device Browser Requirements: • Internet Explorer® 9 or later • Firefox® 20.0 or later • Safari® 5.1 or later • Google Chrome™ 25.0 or later

2

Section 1 - Product Overview

Introduction Features

Easily Extend Your Existing Network The DAP-1610 AC1200 Wi-Fi Range Extender lets you easily extend a secure wireless network with a press of a button. Connect the DAP-1610 to a router via Wi-Fi or Ethernet and share your high-speed Internet access in more places throughout your home or small office. High-speed Wireless Performance With Wireless 802.11ac Technology Thanks to the latest Wireless AC technology, the DAP-1610 provides a wireless connection at up to 1200 Mbps* with other 802.11ac wireless devices. This feature lets you participate in real-time activities online, such as video streaming, online gaming, and real-time audio with smooth performance. Simple Setup All it takes is a press of a button to connect compatible WPS devices to the DAP-1610. Its easy-to-use web interface lets you quickly and easily connect the DAP-1610 to an uplink router, configure the extended wireless network, and manage the administrative settings. The setup wizard will even guide you through the setup process, getting your extended wireless network up and running in no time. Alternatively, connect an Ethernet cable to your existing network infrastructure to quickly and easily create a wireless network. Compatibility The DAP-1610 is fully compatible with now only the latest 802.11ac standard, but is also backwards compatible with IEEE 802.11n/g/ b/a wireless devices, so you can use your existing devices without sacrificing performance. Latest Wireless Network Security and Encryption The DAP-1610 supports wireless security features to prevent unauthorized access from the wireless network. Support for WPA/ WPA2 standards ensure that you’ll be able to use the best possible encryption methods with your compatible wireless devices. * Maximum wireless signal rate derived from standard IEEE specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead may lower actual data throughput rate. Environmental conditions will adversely affect wireless signal range.

D-Link DAP-1610 User Manual

3

Section 1 - Product Overview

What is a Wireless Extender? The DAP-1610 acts as a repeater to extend the range of an existing wireless network to provide a better signal for parts of your home or office that may have poor or no reception. Your existing wireless signal will be re-broadcast by the DAP-1610, allowing you to reach the farthest corners of your home or office. The extended network can simply use the same network credentials as the existing network, or you can specify a different network name and password, giving you the flexibility to control network access. You may also use the DAP-1610 as a wireless access point by connecting an Ethernet cable.

Extend Your Wireless Network using Wi-Fi

Computer Internet

Router

DAP-1610 Extender

Wireless Devices

Create a Wireless Network using Ethernet

Computer Internet D-Link DAP-1610 User Manual

Router

DAP-1610 Access Point

Wireless Devices 4

Section 1 - Product Overview

Hardware Overview Top

1

2

3

4

1

Reset Button

2

Status/WPS LED

3

WPS Button

4

Signal Indicator LED

D-Link DAP-1610 User Manual

Use an unfolded paperclip to press and hold the reset button on the bottom of DAP-1610 until the status LED turns red, to reset the device back to factory default settings. This LED indicates the current status of the DAP-1610. Refer to “Status/WPS LED Indicator” on page 7 for more information. Press to establish a connection with another WPS compatible device. Refer to “WPS Button” on page 43 for more information. The more lit green bars on the Signal Indicator LED, the better the wireless signal to the host network. For more information refer to “Optimize Extender Location” on page 14.

5

Section 1 - Product Overview

Hardware Overview Bottom

1

1

LAN

D-Link DAP-1610 User Manual

Connect an Ethernet cable if you are adding wireless to an existing wired network.

6

Section 1 - Product Overview

Status/WPS LED Indicator

Status/WPS LED Indicator

LED Indicator

Color Green

Power/Status

Status Solid Blinking

Description The DAP-1610 is receiving power and connected to a host network. WPS mode is active and ready to add a wireless device.

Red

Solid

The DAP-1610 is booting or an error has occurred.

Amber

Blinking

The DAP-1610 is not connected to a host network.

None

Off

D-Link DAP-1610 User Manual

Device is not receiving power. Check the power outlet.

7

Section 2 - Installation

Hardware Overview Back

You may locate the Wi-Fi name (SSID) and password for your DAP-1610. This information is printed on the specification sticker on the back of the device. You will need this information to connect your computer or mobile device to the default network (SSID) of your DAP-1610. This information is also provided on the Wi-Fi configuration card.

D-Link DAP-1610 User Manual

8

Section 2 - Installation

Installation

Wireless Installation Considerations The DAP-1610 lets you extend your existing wireless network’s coverage as long as it is within range of the uplink network. Keep in mind that the DAP-1610’s extension network’s range may be limited by the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines: 1. Keep the number of walls and ceilings between the D-Link extender and other network devices to a minimum - each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized. 2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (0.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception. 3. Building materials make a difference. A solid metal door or aluminum studs may have a negative effect on range. Try to position extenders, access points, wireless routers, and computers so that the signal passes through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (fish tanks), mirrors, file cabinets, brick, and concrete will degrade your wireless signal. 4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF noise. 5. If you are using 2.4 GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home security systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4 GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone is not in use.

D-Link DAP-1610 User Manual

9

Section 2 - Installation

Antenna Setup The DAP-1610 is designed to give you the fastest, most stable network connection possible. In order to maximize performance, fully extend the antennas to provide optimal wireless coverage. Keep the extender in an open area for better wireless coverage.

D-Link DAP-1610 User Manual

10

Section 2 - Installation

Hardware Setup Plug the DAP-1610 into a wall outlet, and wait until the Status/WPS LED is blinking amber.

Outlet

Outlet

D-Link DAP-1610 User Manual

Ethernet

Ethernet

11

Section 3 - Configuration

Getting Started There are several configuration tools you can use to set up your DAP-1610. • WPS PBC - To easily extend an existing wireless network refer to “WPS-PBC Configuration” on page 13 for setup instructions. • QRS Mobile App - Use your Android device or iPhone, iPad, or iPod touch to configure your extender. Refer to “QRS Mobile App Setup” on page 15 for setup instructions. • D-Link Setup Wizard - This wizard will launch when you log into the Extender’s web configuration utility for the first time. Refer to ”Setup Wizard” on page 21 for setup instructions. • Manual Configuration - Advanced users who wish to manually setup extender or adjust its settings may refer to “Configuration” on page 31 for more information.

D-Link DAP-1610 User Manual

12

Section 3 - Configuration

WPS-PBC Configuration To connect to a wireless router or access point and extend the Wi-Fi network in your home, first make sure the source router or Access Point features a WPS Button or has a virtual WPS Button.

Step 1 - Initiate WPS Mode While the Status/WPS LED is blinking amber. Push the WPS button on the source wireless router or AP, and then push the WPS button on the DAP-1610. The Status/WPS LED will start to flash green. Please allow up to two minutes for the process to finish. The Status/WPS LED will turn solid green when the DAP-1610 has connected successfully to the source wireless router or access point.

Step 2 - Connecting Devices to the DAP-1610 The DAP-1610 is now ready to share the extended Wi-Fi network with your PCs and mobile devices. You may use the WPS method to connect devices to the extension networks created by the DAP-1610 using the following network names (SSID). The password(s) will be the same as the wireless network you are extending. • (Your router’s SSID)

D-Link DAP-1610 User Manual

13

Section 3 - Configuration

Optimize Extender Location The Status/WPS LED will turn solid green when the DAP-1610 has connected successfully to a wireless network and is extending that network. If the Smart Signal LED has a single amber bar after the connection process has finished, the DAP-1610 has established a poor quality connection. The more lit bars on the Signal Indicator LED, the better the wireless signal. To improve the connection quality, the DAP-1610 should be relocated closer to the source wireless router. If the extender has been configured as an Access Point and is connected via Ethernet cable to an uplink network, the Smart Signal LED will not be lit.

Best Good Ok Poor

D-Link DAP-1610 User Manual

14

Section 2 - Installation

QRS Mobile App Setup The DAP-1610 can be set up from your iPhone, iPod touch, iPad, or Android smartphone or tablet device using the QRS Mobile app. Note: The screenshots may be different depending on your mobile device’s OS version.

Step 1 Search for the free QRS Mobile App on the Apple App Store or Google Play.

Step 2 Once your app is installed, you may now configure your extender. Connect to the router wirelessly by going to your wireless utility on your device. Scan for the WiFi name (SSID) as listed on the supplied configuration card. Select and then enter your Wi-Fi password.

Step 3 Once wirelessly connected to the extender, launch the QRS Mobile app from the Home screen of your device. Note: The following steps show the iOS interface of the QRS Mobile app. If you are using an Android device, the appearance may be different to that of the screenshots, but the process is the same.

D-Link DAP-1610 User Manual

15

Section 3 - Configuration

Click Start to continue.

Click Next to continue.

D-Link DAP-1610 User Manual

16

Section 3 - Configuration

QRS Mobile will first detect your DAP-1610, then scan for available Wi-Fi networks. Select the network you wish to extend. Tap Rescan if your network doesn’t show up the first time.

Enter a password for the existing Wi-Fi network. Click Next to continue.

D-Link DAP-1610 User Manual

17

Section 3 - Configuration

Enter a network name (SSID) and password for the extended Wi-Fi network. Click Next to continue.

Create an admin password for the DAP-1610’s web-based configuration utility. Click Next to continue.

D-Link DAP-1610 User Manual

18

Section 3 - Configuration

A summary of your settings will be displayed. Click Save to reboot the device and to complete the setup.

After the setup wizard is complete, the following screen will appear. To connect to the extended network, you can now change your mobile device and laptop Wi-Fi settings to the wireless network name and password you just created. You can also share your Wi-Fi information by clicking Share by E-mail.

D-Link DAP-1610 User Manual

19

Section 3 - Configuration

Web-based Setup To access the setup utility for the DAP-1610 AC1200 Wi-Fi Range Extender on your PC, first connect to the DAP-1610 wirelessly using the Wi-Fi name (SSID) and password located on your Wi-Fi Configuration Card. Then open a web browser and enter http://dlinkap.local./ in your browser’s URL field. You may also enter the IP address* of the DAP-1610. * The default IP address is 192.168.0.50. Once your DAP-1610 connects to the host network, it will be assigned a new IP address based on your network’s DHCP settings. You will need to log in to your router to see what IP address is assigned to your DAP-1610. For multiple DAP-1610s, go to http://dlinkapxxxx.local. as shown on the included Wi-Fi Configuration Card, with “xxxx” being the last four digits of the DAP-1610’s MAC address.

Enter your password. By default, Admin is the username and cannot be changed, and by default, the password is blank.

The configuration interface will open, and you can configure the various settings for the DAP-1610. If you have not yet configured an uplink network, the home screen will show that there is no connection between the DAP-1610 and the uplink router.

D-Link DAP-1610 User Manual

20

Section 3 - Configuration

Setup Wizard If this is your first time logging in to the extender and no connection has been established, the setup wizard will automatically appear. In the future, if you wish to set up your extender using the setup wizard, click the Uplink Router icon.

The setup wizard is designed to guide you through a step-by-step process to configure your new DAP-1610 AC1200 Wi-Fi Range Extender to extend your wireless network and connect to the Internet. The steps are: Step 1: Connecting Your Device Step 2: Configuring Your Settings Step 3: Setting a Password for Your Device Click Next to begin.

D-Link DAP-1610 User Manual

21

Section 3 - Configuration

Connecting Your Device via WPS After clicking the Next button from the previous step, the DAP-1610 will automatically initiate a WPS-PBC (Wireless Protected Setup - Push Button Control) search to find an uplink network to extend. If your existing wireless networking device has a physical or virtual WPS button, press or enable it within the 120 seconds allotted by the countdown timer. If you do not wish to use WPS or your existing networking device does not have a WPS feature, select one of the alternative configuration options: Extend an existing network, see page 24 for more information or Add wireless to your wired network, see page 27 for further setup information.

Once the 120 second timer has elapsed, proceed to the next page.

D-Link DAP-1610 User Manual

22

Section 3 - Configuration

WPS Successful If a WPS connection is successfully established you will be prompted to configure your extension network settings. The current network names and passwords will be displayed. You may now rename the 2.4 GHz and 5 GHz networks. If you wish to input different passwords for each network, deselect use the same password for both networks and create new passwords. Please be sure to note any changes you make as these credentials will be required for wireless clients wishing to join your network. Click Next to proceed to Configure Administrator Password, refer to page 29 for more information, or click Back to return to the previous step.

*Wireless network names and passwords are shown for example only.

WPS Unsuccessful If the WPS countdown timer expires, and no connection to an uplink wireless network could be established, you may press the retry button to attempt the process again or if you do not wish to use WPS ,or are having difficulty using the WPS feature, you can try using one of the alternative configuration options: Extend an existing network, see page 24 for more information or Add wireless to your wired network, see page 27 for further setup information.

D-Link DAP-1610 User Manual

23

Section 3 - Configuration

Extend an Existing Network To set up your network manually, select Extend an Existing Network from the setup wizard menu. Click Next to continue.

The DAP-1610 will scan for available wireless networks and display a list of results. You may choose one of the following options to proceed: • If the wireless network you wish to extend was detected by the scan, click on the network to select it. The extender will automatically forward you to the next step.

dlinkrouter

• If the network you would like to extend was not detected by the scan, click the Manual button. Note: If the wireless network you would like to extend to was not detected by the scan, your DAP-1610 might be out of range and you may need to reposition the extender closer to the host network device.

D-Link DAP-1610 User Manual

24

Section 3 - Configuration

If the wireless network you wish to extend was detected by the scan, enter the password now. Click Next to continue on to configure your extension network settings, or click Back to return to the previous step. dlinkrouter

If you chose Manual , enter the Wireless Network Name, type of Security, and Password of the existing Wi-Fi network you wish to connect to. Click Next to continue on to configure your extension network settings, or click Back to return to the previous step. dlinkrouter

D-Link DAP-1610 User Manual

25

Section 3 - Configuration

If a connection is successfully established you will be prompted to configure your extension network settings. The current network names and passwords will be displayed. You may now rename the 2.4 GHz and 5 GHz networks. If you wish to input different passwords for each network, deselect use the same password for both networks and create new passwords. Please be sure to note any changes you make as these credentials will be required for wireless clients wishing to join your network. Click Next to proceed to Configure Administrator Password, refer to page 29 for more information, or click Back to return to the previous step.

D-Link DAP-1610 User Manual

*Wireless network names and passwords are shown for example only.

26

Section 3 - Configuration

Add Wireless to Your Wired Network This portion of the setup wizard will guide you through adding a wireless network to an existing wired network. Click Add wireless to your wired network to proceed.

Connect an Ethernet cable to your DAP-1610 if you have not already done so. After making the connection, you will automatically be forwarded to the next step. If you haven’t connected an Ethernet cable yet, but will do so later, click skip.

D-Link DAP-1610 User Manual

27

Section 3 - Configuration

If a connection is successfully established you will be prompted to configure your wireless network settings. The current network names and passwords will be displayed. You may now rename the 2.4 GHz and 5 GHz networks. If you wish to input different passwords for each network, deselect use the same password for both networks and create new passwords. Please be sure to note any changes you make as these credentials will be required for wireless clients wishing to join your network. Click Next to proceed to Configure Administrator Password, refer to page 29 for more information, or click Back to return to the previous step.

D-Link DAP-1610 User Manual

*Wireless network names and passwords are shown for example only.

28

Section 3 - Configuration

Configure Administrator Password In order to secure the extender’s web configuration utility, please enter a new password. You will be prompted for this password each time you want to use the extender’s web configuration utility. Click Next to continue onward to Save Your Configuration.

D-Link DAP-1610 User Manual

29

Section 3 - Configuration

Save Your Configuration At the end of the wizard, you will be presented with a final summary of your settings. It is recommended that you record this information for future reference. Click Finish to close the wizard.

dlink0692 dlink0692-5GHz SecurePassword4WiFi

SecurePassword9

*Wireless network names and passwords are shown for example only.

You will be asked if you wish to create a bookmark to the web configuration utility.

Your changes will be saved and the extender will reboot. Devices may be connected to the new wireless extension network(s) once the extender successfully reboots.

D-Link DAP-1610 User Manual

30

Section 3 - Configuration

Configuration Home

The home screen gives a summary of the current status of devices connected to the DAP-1610. A green check between the device and the uplink router indicates that there is an active connection. A red cross indicates that there is no connection present, or there is a connection error. If there’s no active uplink connection, click on the Uplink Router icon to start the setup wizard.

Uplink Router: This icon shows the status of the Internet connection to the uplink router. It is grey if the DAP-1610 is not connected to an uplink router. Once connected, click on it to see its connection details. DAP-1610: Click on this icon to see details of the uplink network the DAP-1610 is connected to or connect to another uplink router.. Connected Click on the Wi-Fi Clients icon to see client details. Clients: D-Link DAP-1610 User Manual

31

Section 3 - Configuration

Once your Internet connection is set up, you can view the details of both the uplink network and the extended Wi-Fi network by clicking on the DAP-1610 icon.

Upon clicking the Uplink Router icon, you will see the connection type, network status, connection up time, network name (SSID), and password.

If you wish to connect to a different uplink router, press the Connect to a different uplink router button.

DIR-860L

After clicking Connect to a different uplink router a survey of available wireless networks will be performed. After clicking Select you will be prompted for the uplink router password. Enter it and click Connect. “DIR-860L-5GHz”

DIR-860L DIR-860L-5GHz DIR-850L DIR-850L-5GHz

Select

D-Link DAP-1610 User Manual

32

Section 3 - Configuration

Settings

Extender Settings This page lets you configure the settings for the DAP-1610’s extended wireless network. To access this page, click the Settings dropdown menu at the top of the page, and select Extender. Click Save to apply the settings and return to the home page. Existing Network Existing Select the type of existing network, either Ethernet or Wi-Fi Network: you want the DAP-1610 to connect to. 2.4 GHz Extended Wi-Fi Status: Enable or disable this network by toggling this slider. Wi-Fi Name This is the name of the DAP-1610’s extended network. (SSID): If using Wi-Fi, the DAP-1610 will rebroadcast the uplink router’s Internet connection under this SSID. You may also manually set the SSID of the extended network. Security: Select the type of wireless security you wish to use for the extended network. Choose None or WPA/WPA2 Personal. Password: Enter the password or network key that you wish to use for the extended network. Wi-Fi Select Auto or any channel from 1 to 11 for use with this Channel: network. Channel Select Auto 20/40 or 20 MHz for the bandwidth you wish Width: this network to use. HT20/40 Enable or disable HT20/40 coexistence by toggling the slider. Coexistence:

D-Link DAP-1610 User Manual

33

Section 3 - Configuration 5 GHz Extended Wi-Fi Status: Enable or disable this 5 GHz network by toggling this slider. Wi-Fi Name This is the name of the DAP-1610’s extended network. (SSID): If using Wi-Fi, the DAP-1610 will rebroadcast the uplink router’s Internet connection under this SSID. You may also manually set the SSID of the extended network. Security: Select the type of wireless security you wish to use for the extended network. Choose None or WPA/WPA2 Personal. Password: Enter the password or network key that you wish to use for the extended 5 GHz network. Wi-Fi Select Auto or any channel for use with this network. Channel: Channel Select Auto 20/40/80, 20 MHz, or 20/40 MHz for the Width: bandwidth you wish this network to use.

D-Link DAP-1610 User Manual

34

Section 3 - Configuration

Network Settings This page lets you configure the network settings for the DAP-1610. To access this page, click the Settings drop-down menu at the top of the page, then select Network. Click Save at any time to save the changes you have made on this page. Management You can change the URL name of the device by editing the Link: text in the text box. If you change the name of the device, you will need to enter “http://xxxx.local.” (where “xxxx” corresponds to the name of the device) in the address bar of your web browser in order to access the configuration utility.

Advanced Settings The Advanced Settings section of the Network Settings page allows you to configure both IPv4 and IPv6 settings that will be used by the DAP-1610’s extended network. IPv4 Device Management Interface My LAN Here you can select whether you want the IP to have a Connection is: Dynamic IP or Static IP address. If you select Dynamic IP, the options below will not be available. IP Address: Enter the Static IP address that you want to assign to the extended network AP. This address should be outside of the uplink router’s DHCP address pool. Subnet Mask: Enter the subnet mask. Gateway Enter the gateway address. This is usually the IP address of Address: the uplink router. Primary DNS Enter the address of the primary DNS server. Server: Secondary Enter the address of the secondary DNS server. This is DNS Server: optional but will provide backup if the primary server fails.

D-Link DAP-1610 User Manual

35

Section 3 - Configuration

Autoconfiguration (SLAAC/DHCPv6) IPv6 Device Management Interface My IPv6 Select Autoconfiguration (SLAAC/DHCPv6) to have the Connection is: DAP-1610 automatically receive an IPv6 address from the uplink router. Obtain IPv6 You can select to obtain IPv6 DNS server information DNS Servers automatically, or you can select to configure DNS servers Automatically: manually by clicking on the radio dial next to the option. Primary DNS For manual settings, enter the primary IPv6 DNS server Server: address. Secondary DNS For manual settings, enter the secondary IPv6 DNS server Server: address. This is optional but will provide backup if the primary server fails.

D-Link DAP-1610 User Manual

36

Section 3 - Configuration

Static IPv6 IPv6 Device Management Interface My IPv6 Select Static IPv6 to manually assign an IP address to the Connection is: DAP-1610. IPv6 Address: Enter the IPv6 address that you want to assign to the extended network AP. This address should be outside of the uplink router’s DHCP address pool. Subnet Prefix Enter the length of the IPv6 subnet prefix. Length: Default Gateway: Enter the default gateway. Primary DNS Enter the primary IPv6 DNS server address. Server: Secondary DNS Enter the secondary IPv6 DNS server address. This is optional Server: but will provide backup if the primary server fails.

D-Link DAP-1610 User Manual

37

Section 3 - Configuration

Link-local Only IPv6 Device Management Interface My IPv6 Select Link-local only to only set an IPv6 address for the Connection is: local network. LAN IPv6 Link- The link-local address of the DAP-1610. Local Address:

D-Link DAP-1610 User Manual

38

Section 3 - Configuration

Management Admin

This page will allow you to set a new password for the administrator account used to configure the DAP-1610. You can also enable graphical authentication (CAPTCHA) on this page. To access this page, click the Management drop down menu at the top of the page, and select Admin. Click Save at any time to save the changes you have made on this page.

Admin Enter the Admin password. Password: Enable Click on the slider to enable graphical authentication, Graphical or CAPTCHA. This provides an extra layer of security by Authentication: requiring you to enter a code that is displayed on-screen. This can help prevent unauthorized users from gaining access to your wireless network using automated methods. Note: The device will reboot after saving the changes in order for the password to take effect.

D-Link DAP-1610 User Manual

39

Section 3 - Configuration

System This page allows you to save or restore your system configuration, reset, or reboot the DAP-1610. To access this page, click the Management drop down menu at the top of the page, and select System. Click Save at any time to save the changes you have made on this page. Save Settings Save the system settings onto a file to the local hard drive. To Local Hard You will then see a file dialog where you can select a location Drive: and enter a file name for the configuration file. Load Settings Load the system settings from a previously saved file on the From Local local hard drive. Hard Drive: Restore Restore the system settings to factory default settings. This to Factory will erase all currently stored settings. Default Settings: Reboot the Click Reboot to reboot the DAP-1610. Device:

D-Link DAP-1610 User Manual

40

Section 3 - Configuration

Upgrade Firmware and language upgrades may be provided for the DAP-1610 in the future. You can check and upgrade your firmware and language pack on this page. To access this page, click the Management drop down menu at the top of the page, and select Upgrade. Click Save at any time to save the changes you have made on this page. Firmware Information Firmware This section displays the currently installed firmware version, Information: as well as the date on which the current firmware version was released. Click Check For New Firmware to find out if there is new or updated firmware. If there is, you can download it to your computer. Upgrade Manually Upgrade Click Select File to locate the firmware file on your computer Firmware: and perform a manual firmware upgrade.

D-Link DAP-1610 User Manual

41

Section 3 - Configuration

Statistics This page displays details about your wireless and network connections. To access this page, click the Management drop- down menu at the top of the page, and select Statistics. Click Clear to reset the statistics. Wi-Fi Click on the Wi-Fi tab to display the statistics for the connection between the DAP-1610 and the uplink router. The Blue line indicates the upload speeds and the red line indicates the download speeds. The table displays the following in real-time: • Total Packets • Total Byte(s) • Total Kbit(s) • Kbits/sec Extended Wi-Fi Click on the Extended Wi-Fi tab to display the statistics for the connection between the DAP-1610 and any connected clients.

D-Link DAP-1610 User Manual

42

Section 4 - Connecting a Wireless Client

Connecting Wireless Clients to the Extended Network WPS Button Once an uplink network has been established, you may use the DAP-1610’s WPS function to add additional wireless clients to your extended network. Many wireless devices such as wireless routers, media players, printers, and cameras will have a WPS button (or a software utility with WPS) that you can press to connect to the DAP-1610. Please refer to the user manual for the wireless device you want to connect to make sure you understand how to enable WPS. Once you know, follow the steps below: Step 1 - Press the WPS button on the DAP-1610 for about 1 second. The LED on the device will start to blink. You can also use the WPS option in the setup wizard section of the web interface. Step 2 - Within 120 seconds, press the WPS button on your wireless device. Step 3 - Allow up to 1 minute to configure. Once the LED light stops blinking and turns solid green, you will be connected and your wireless connection will be secured with WPA2.

D-Link DAP-1610 User Manual

43

Section 4 - Connecting a Wireless Client

Windows® 8 WPA/WPA2

It is recommended to enable wireless security (WPA/WPA2) on your wireless router or extender before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key (Wi-Fi password) being used. To join an existing network, locate the wireless network icon in the taskbar, next to the time display. Wireless Icon

Clicking on this icon will display a list of wireless networks which are within connecting proximity of your computer. Select the desired network by clicking on the network name.

D-Link DAP-1610 User Manual

44

Section 4 - Connecting a Wireless Client

You will then be prompted to enter the network security key (Wi-Fi password) for the wireless network. Enter the password into the box and click Next. If you wish to use Wi-Fi Protected Setup (WPS) to connect to the router, you can also press the WPS button on your router at this point to enable the WPS function.

When you have established a successful connection with a wireless network, the word Connected will appear next to the name of the network to which you are connected.

D-Link DAP-1610 User Manual

45

Section 4 - Connecting a Wireless Client

Windows® 7 WPA/WPA2

It is recommended to enable wireless security (WPA/WPA2) on your wireless router or extender before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used.

1. Click on the wireless icon in your system tray (lower-right corner).

Wireless Icon

2. The utility will display any available wireless networks in your area.

D-Link DAP-1610 User Manual

46

Section 4 - Connecting a Wireless Client

3. Highlight the wireless network (SSID) you would like to connect to and click the Connect button. If you get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the Wireless Basics section in this manual for more information.

4. The following window appears while your computer tries to connect to the router.

D-Link DAP-1610 User Manual

47

Section 4 - Connecting a Wireless Client

5. Enter the same security key or passphrase that is on your router and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router.

D-Link DAP-1610 User Manual

48

Section 4 - Connecting a Wireless Client

Windows Vista® Windows Vista® users may use the built-in wireless utility. If you are using another company’s utility or Windows® 2000, please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a “site survey” option similar to the Windows Vista® utility as seen below. If you receive the “Wireless Networks Are Available” bubble, click on the center of the bubble to access the utility. or Right-click on the wireless computer icon in your system tray (lowerright corner next to the time). Select Connect to a network.

The utility will display any available wireless networks in your area. Click on a network (displayed using the SSID) and click Connect. If you get a good signal but cannot access the Internet, check the TCP/ IP settings for your wireless adapter. Refer to“Troubleshooting”on page 52 for more information.

D-Link DAP-1610 User Manual

49

Section 4 - Connecting a Wireless Client

WPA/WPA2 It is recommended to enable wireless security (WPA/WPA2) on your wireless router or extender before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used.

1. Open the Windows Vista® Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect to a network.

2. Highlight the wireless network (SSID) you would like to connect to and click Connect.

D-Link DAP-1610 User Manual

50

Section 4 - Connecting a Wireless Client

3. Enter the same security key or passphrase that is on your router and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router.

D-Link DAP-1610 User Manual

51

Section 5 - Troubleshooting

Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the DAP-1610. Read the following descriptions if you are having problems. The examples below are illustrated in Windows® XP. If you have a different operating system, the screenshots on your computer will look similar to the following examples. 1. Why can’t I access the web-based configuration utility? When entering the IP address of the AC1200 Wi-Fi Range Extender (dlinkap.local for example), you are not connecting to a website nor do you have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility. • Make sure you have an updated Java-enabled web browser. We recommend the following: • Internet Explorer 9 or later • Firefox 20.0 or later • Safari 5.1 or later • Google Chrome 25.0 or later

• Make sure that you are connected to the same wireless network which is listed on the base of the DAP-1610. If you have an active wired LAN Ethernet connection, try temporarily unplugging the Ethernet cable from the computer you are using, as this may eliminate possible conflicts from having two simultaneous connections on the same computer. • Disable any Internet security software running on the computer. Software firewalls such as ZoneAlarm, BlackICE, Sygate, Norton Personal Firewall, and Windows® XP firewall may block access to the configuration pages. Check the help files included with your firewall software for more information on disabling or configuring it.

D-Link DAP-1610 User Manual

52

Section 5 - Troubleshooting

• Configure your Internet settings: • Go to Start > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab, click the button to restore the settings to their defaults. • Click the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button. Make sure nothing is checked. Click OK. • Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK three times. • Close your web browser (if open) and open it.

• Access the web management interface. Open your web browser and enter the address of your extender (http://dlinkap.local) in the address bar. This should open the login page for your web management. If the DAP-1610 is not connected to an uplink router, you can try accessing the web interface using the default IP address http://192.168.0.50. • If you still cannot access the configuration, unplug the extender from the power outlet for at least 10 seconds and plug it back in. Wait about 30 seconds and try accessing the configuration. If you have multiple computers, try connecting using a different computer. 2. What can I do if I forgot my password? If you forgot your password, you must reset your extender. Unfortunately this process will change all your settings back to the factory defaults. To reset the extender, locate the reset button (hole) on the underside panel of the unit. With the extender powered on, use a paperclip to hold the button down until the status LED turns red. Release the button and the extender will go through its reboot process (indicated by the LED turning red). Wait about 30 seconds to access the extender. The default IP address is http://dlinkap.local. When logging in, the username is admin and leave the password box empty.

D-Link DAP-1610 User Manual

53

Appendix A - Wireless Basics

Wireless Basics D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely and conveniently access your network. You will be able to enjoy the freedom that wireless networking delivers. A wireless local area network (WLAN) is a cellular computer network that transmits and receives data with radio signals instead of wires. Wireless LANs are used increasingly in both home and office environments, and public areas such as airports, coffee shops and universities. Innovative ways to utilize WLAN technology are helping people to work and communicate more efficiently. Increased mobility and the absence of cabling and other fixed infrastructure have proven to be beneficial for many users. Wireless users can use the same applications they use on a wired network. Wireless adapters used on laptop and desktop systems support the same protocols as Ethernet adapter cards. Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to use servers, printers or an Internet connection supplied through the wired LAN. A wireless router is a device used to provide this link.

D-Link DAP-1610 User Manual

54

Appendix A - Wireless Basics

Tips Here are a few things to keep in mind when you are installing your AC1200 Wi-Fi Range Extender. Centralize the extender’s location For best performance, make sure you place the extender in a centralized location within your desired usage area. Try to place the extender so that there are minimal obstructions between it and the uplink router. If possible, use an elevated power outlet, so the signal can be dispersed more easily. If you have a large home or usage area, you may need several extenders in order to achieve optimal coverage. Eliminate Interference Place home appliances such as cordless telephones, microwaves, and televisions as far away as possible from the extender. This can significantly reduce any interference that the appliances might cause since they operate on same frequency. Security Don’t let your neighbors or intruders connect to your wireless network. Secure your wireless network by utilizing the WPA or WEP security feature on the extender and uplink router. Refer to the relevant sections of this manual for further details.



D-Link DAP-1610 User Manual

55

Appendix B - Technical Specifications

Standards • IEEE 802.11ac • IEEE 802.11a • IEEE 802.11n • IEEE 802.11g • IEEE 802.11k • IEEE 802.11v

Technical Specifications

Wireless Frequency Range 1 • 2.4 GHz to 2.4835 GHz • 5.18 MHz to 5.85 MHz Device Interfaces • 802.11ac/n/g/a Wireless LAN • 10/100 Fast Ethernet Port • Reset Button • WPS Button Antenna • External Antenna Security • Wi-Fi Protected Access (WPA/WPA2) • Wi-Fi Protected Setup (WPS) • Wired Equivalent Privacy (WEP) 64/128-bit Advanced Features • QRS Mobile setup app for iOS and Android devices Device Management • Web UI Diagnostic LEDs • Status/WPS Frequency range varies depending on local regulations

1

D-Link DAP-1610 User Manual

• 3 Segment Wi-Fi Signal Strength Indicator

Operating Temperature • 0 to 40 ˚C (32 to 104 ˚F) Storage Temperature • Storage: -20 to 65 °C (-4 to 149 °F) Operating Humidity • 0% to 90% non-condensing Storage Humidity • 5% to 95% non-condensing Power Input • AC 100-240V 0.3A Max Maximum Power Consumption • 7.5 W Certifications • FCC • CE • IC • RCM • UL • IDA • PSB • CB Dimensions • 50 x 97 x 48 mm Weight • 139 grams (4.9 ounces) 56

Appendix C - GPL Code Statement

GPL Code Statement This D-Link product includes software code developed by third parties, including software code subject to the GNU General Public License (“GPL”) or GNU Lesser General Public License (“LGPL”). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL code and LGPL code used in this product, are available to view the full GPL Code Statement at: https://tsd.dlink.com.tw/GPL The GPL code and LGPL code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL code and the LGPL code for this product and the terms of the GPL and LGPL.

Where such specific license terms entitle you to the source code of such software, D-Link will provide upon written request via email and/or traditional paper mail the applicable GPL and LGPLsource code files via CD-ROM for a nominal cost to cover shipping and media charges as allowed under the GPL and LGPL. Please direct all inquiries to: Email: [email protected] Snail Mail: Attn: GPLSOURCE REQUEST D-Link Systems, Inc. 17595 Mt. Herrmann Street Fountain Valley, CA 92708

D-Link DAP-1610 User Manual

57

Appendix D - Safety Statements

Safety Statements Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Operation of this device is restricted to indoor use only.

IMPORTANT NOTICE:

Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Country Code selection feature to be disabled for products marketed to the US/CANADA Industry Canada statement:

D-Link DAP-1610 User Manual

58

Appendix D - Safety Statements Industry Canada statement: This device complies with ISED licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’ISED applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si lebrouillage est susceptible d’en compromettre le fonctionnement. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. Le dispositif rencontre l’exemption des limites courantes d’évaluation dans la section 2.5 de RSS 102 et la conformité à l’exposition de RSS-102 rf, utilisateurs peut obtenir l’information canadienne sur l’exposition et la conformité de rf. Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) des bandes de 5 250 à 5 350 MHz et de 5 650 à 5 850 MHz et, d’autre part, que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs de RL-EL. Caution: (i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; Avertissement: (i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux; Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Déclaration d’exposition aux radiations: Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. D-Link DAP-1610 User Manual

59

Appendix D - Safety Statements

NCC 警語： 電磁波曝露量 MPE 標準值 (MPE) 1mW/cm2，送測產品實值為 0.085mW/cm2 經型式認證合格之低功率射頻電機，非經許可，公司，商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。 前項合法通信，指依電信法規定作業之無線電通信。 低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。 在 5.25-5.35 秭赫頻帶內操作之無線資訊傳輸設備，限於室內使用。

D-Link DAP-1610 User Manual

60